Full Parts list


This is copied from assembly guide – buy/find any tools you need when you buy the parts to save time.

  1. Either a pair of channel lock pliers or a pipe wrenchScreen Shot 2015-12-04 at 3.29.33 PM
  2. keg faucet wrench to tighten the faucets onto the shank. Screen Shot 2015-12-04 at 3.29.51 PM
  3. some electrical tape (optional, but recommended)
  4. flathead screwdriver for hose clamps


For “One-Stop” shopping…

This button will put all of the pipe parts into your cart
This will put all the entry level beer parts in your cart

If you click those, then collect the tools above and read the assembly guide when your parts arrive.


10 ft of 3/16 beer line
Screen Shot 2015-12-04 at 3.27.34 PM
Screen Shot 2015-12-04 at 3.27.29 PM
 stainless hose clamps


Here’s the parts list for the iron pieces of the tower.
2″ to 1″ bushings 2x
2″ tee 1x
2″ street elbow 2x
2″ x 6″ black iron nipple 1x
2″ floor flange 1x


There are a lot of different ways that one could mount this to their bar / fridge / minifridge, so I can’t give you a one-size fits all answer. It will almost always use bolts, nuts, and washers. The length is determined by your individual install.

This post has a lot of amazon links, many of which are affiliate. Feel free to shop around, and have fun building.